5 Series E39 M5 (S62) SAL
Oil is sprayed when splined shafts are pressed back. Cover
bore (1) with a cloth.
Connect special tool 12 6 050 in conjunction with special tool
12 6 411 (from special tool kit 12 6 410 ) to solenoid valves of
VANOS adjustment unit. Connect special tool 12 6 411 to
correct terminals on car battery.
Press buttons 1 and 3 on special tool
12 6 050
simultaneously. Solenoid valves are actuated.
Press splined shafts by hand up to stop into initial position.
Replace O-rings (1 and 2) on VANOS adjustment unit.
Coat O-rings (1) with oil as antiseize agent.
Caution!
O-rings (2) fall out very easily, secure with grease if
necessary.
Cylinder bank 1 to 4:
Turn spline hubs (1) of inlet and exhaust camshafts to right limit
position.
Cylinder bank 1 to 4:
Attach VANOS adjustment unit.
RA Replacing right camshafts (S62)
BMW AG - TIS
21.02.2013 07:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 20 -