5 Series E39 M5 (S62) SAL
Cylinder bank 5 to 8:
Withdraw toothed sleeves (2) from exhaust and inlet camshafts.
Connect special tool 12 6 050 in conjunction with special tool
12 6 411 to solenoid valves of VANOS adjustment unit. Connect
special tool 12 6 411 to correct terminals on car battery.
Press button 1 on special tool 12 6 050 and at same time pull
out exhaust-side splined shaft by hand as far as it will go.
Press button 3 on special tool 12 6 050 and at same time pull
out inlet-side splined shaft by hand as far as it will go.
Caution!
CCW thread!
Brace against twin surface (1) and release hex head (2).
Release screw connection of splined shaft on inlet and exhaust
sides.
Installation:
Removal of the VANOS adjustment unit and the VANOS gear is
described separately from installation. The assembly sequence for
installation and removal is different.
RA Removing and installing/replacing left VANOS gear (S62)
BMW AG - TIS
21.02.2013 08:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -