5 Series E39 M5 (S62) SAL
Cylinder bank 5 to 8:
Place chain (1) and sprocket wheels (2) on camshafts.
Align chain (1) and sprocket wheels (2) so that stud (3) on
bearing cap is flush with a tapped hole (3) on sprocket wheel.
Cylinder bank 5 to 8:
Push on centering sleeves (1) for exhaust and inlet sides, align
bore holes to tapped holes in camshafts.
Cylinder bank 5 to 8:
Insert bolts for centering sleeves (1).
Note:
Grip camshafts at hexagon head.
Tighten down bolts on centering sleeves (1).
Cylinder bank 5 to 8:
Note:
The camshafts have an opening. The 1st bearing caps have a
locating bore.
Align camshafts so that camshaft openings line up with locating
bore in bearing cap.
Secure camshafts with special tool 11 7 120 .
RA Removing and installing/replacing left VANOS gear (S62)
BMW AG - TIS
21.02.2013 08:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 12 -