5 Series E39 M5 (S62) SAL
Cylinder bank 1 to 4:
Compress secondary chain tensioner at bottom and special tool
11 7 140 .
Cylinder bank 1 to 4:
If necessary, realign chain (1) and sprocket wheels (2).
Align chain (1) and sprocket wheels (2) so that stud (3) on
bearing cap is flush with a tapped hole (3) on sprocket wheel.
Cylinder bank 1 to 4 (exhaust side):
Fit spacer ring (2).
Align bores in spacer ring (2) to threads in sprocket wheel.
Cylinder bank 1 to 4 (exhaust side):
Version up to 9/2001
Caution!
Risk of mixing up parts.
Note:
Plate spring (2) and supporting ring (3) form a set and may only
be fitted together.
Thickness of plate spring (2) = 0.85 mm.
Thickness of supporting ring (3) = 3.55 mm.
RA Removing and installing/replacing right VANOS gear (S62)
BMW AG - TIS
21.02.2013 10:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 13 -
