5 Series E39 M5 (S62) SAL
Rotate crankshaft in direction of rotation as far as ignition TDC
position of cylinder 1. Secure vibration damper in position with
special tool 11 2 300 .
Cylinder bank 5 to 8:
Remove oil line from VANOS adjustment unit.
Cylinder bank 5 to 8:
Fit special tool 11 7 130 to VANOS adjustment unit.
Connect compressed air (2 to 8 bar).
Cylinder bank 5 to 8:
Disconnect plug connection for solenoid valves on cylinder
bank 5 to 8.
Connect special tool 12 6 050 in conjunction with special tool
12 6 411 (from special tool kit 12 6 410 ) to solenoid valves
on cylinder bank 5 to 8. Connect special tool
12 6 411 to
correct terminals on car battery.
Alternately press toggle switch buttons 4 and 3 several times on
special tool 12 6 050 .
RA Removing and installing/replacing right VANOS gear (S62)
BMW AG - TIS
21.02.2013 10:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 23 -
