5 Series E39 M5 (S62) SAL
Cylinder bank 5 to 8:
Press and hold down toggle switch button 2 on special tool
12 6 050 .
Simultaneously rotate exhaust camshaft at hexagon against
direction of rotation up to stop.
Note:
The splines in the VANOS gear are now in contact; the
exhaust camshaft cannot be rotated further.
Remove special tool 11 2 300 . Rotate crankshaft in direction of
rotation a further revolution up to overlap TDC position.
Cylinder bank 1 to 4:
Slacken six accessible bolts two turns.
Cylinder bank 5 to 8:
Slacken six accessible bolts two turns.
RA Removing and installing/replacing toothed shafts of VANOS gear on left and right
BMW AG - TIS
21.02.2013 15:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
