5 Series E39 M5 (S62) SAL
Cylinder bank 5 to 8:
Release screws on VANOS adjustment unit.
Cylinder bank 5 to 8:
Carefully lever out VANOS adjustment unit at "intended" openings
with a screwdriver on left and right.
Cylinder bank 5 to 8:
Detach VANOS adjustment unit together with toothed shafts.
Cylinder bank 1 to 4:
Connect special tool 12 6 050 in conjunction with special tool
12 6 411 to solenoid valves of VANOS adjustment unit. Connect
special tool 12 6 411 to correct terminals on car battery.
Press button 4 on special tool 12 6 050 and simultaneously
pull out toothed shaft of exhaust side by hand up to stop.
Press button 2 on special tool 12 6 050 and simultaneously
pull out toothed shaft of inlet side by hand up to stop.
RA Removing and installing/replacing toothed shafts of VANOS gear on left and right
BMW AG - TIS
21.02.2013 15:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -