5 Series E39 M5 (S62) SAL
Note:
If the oil pressure control plunger is to be removed, it is first
necessary to remove the suction pipe (1).
Unfasten screws.
Detach suction pipe (1).
Replace O-ring (1) and coat with oil.
Press bush of oil pressure control plunger downwards with a
suitable mandrel.
Caution!
High spring pressure.
Lift out circlip (1).
Installation:
(1)
Control plunger
(2)
Spring
(3)
Sleeve
(4)
Circlip
RA Removing and installing/replacing oil pump (S62)
BMW AG - TIS
21.02.2013 15:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
