bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

6 RA Replacing Left Knock Sensors (cylinder Bank 5-8) (S62)|Page 1248 > < 5 RA Replacing Right Knock Sensors (cylinder Bank 1-4) (S62)|Page 1246
Page 1
background image

12 14 611

Replacing left knock sensors (cylinder bank
5-8) (S62)

Interrogate fault memory of DME control unit.

Switch off ignition.

Remove manifold for intake air,

refer to 11 61 050.

Note:

Remove and install idle speed control valve,

refer to 13 41 500.

Unclip plug connections (1) and (2).

Release screws (3).

Remove retaining bracket (4).

Note:

For a better overview, the following work step is shown on an
engine that has been removed.

Disconnect plug connection (1) of left knock sensor pair from
cable duct.

RA  Replacing left knock sensors (cylinder bank 5-8) (S62)

BMW AG - TIS

21.02.2013  16:05

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

6 RA Replacing Left Knock Sensors (cylinder Bank 5-8) (S62)|Page 1248 > < 5 RA Replacing Right Knock Sensors (cylinder Bank 1-4) (S62)|Page 1246