5 Series E39 M5 (S62) SAL
Note:
For further test procedures,
refer to 13 31 ... Fuel pressure check.
Note:
Removing special tool kit 13 5 220 :
-
Switch off engine
-
Screw out check valve fully again.
-
Remove special tool kit 13 5 220 from pressure regulator
housing.
-
Catch and dispose of escaping fuel.
Note:
Interrogate fault memory of DME control module.
Check stored fault messages.
Rectify faults.
Then clear fault memory.
RA Checking fuel pump delivery pressure (S62)
BMW AG - TIS
21.02.2013 16:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -