5 Series E39 M5 (S62) SAL
13 90 500
Replacing tank venting valve (S62)
Interrogate fault memory of DME control unit.
Switch off ignition.
Location:
Under intake air manifold at rear.
Remove and install intake air manifold,
refer to 11 61 050.
Disconnect plug connection (1) on tank venting valve.
Pull off tank venting valve together with rubber retainer from
retainer.
Press locking bracket (1).
Remove hose (2).
Pull off molded hose (3) from tank venting valve towards bottom.
Remove tank venting valve.
Installation:
Apply a thin anti-friction rubber coating (e.g. petroleum jelly) to
sealing surface of molded hose (3).
RA Replacing tank venting valve (S62)
BMW AG - TIS
21.02.2013 19:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
