5 Series E39 M5 (S62) SAL
Unfasten nut.
If necessary, expand the swivel bearing with special
tool 31 2 200 and press downwards.
Installation:
Press swivel bearing up to stop and note the mark indicating
the installation position.
Replace self-locking nut. Tightening Torque,
refer to Technical Data 31 21 4AZ.
Unfasten nut.
Press off ball joint with special tool 31 2 240.
Remove traction strut.
Installation:
Tapered spigot and bore both free of grease.
Use washer (1). Replace self-locking nuts.
Tightening Torque, if necessary brace on hex cap nut,
refer to Technical Data 31 12 8AZ.
RA Removing and installing or replacing both traction struts
BMW AG - TIS
21.02.2013 21:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
