5 Series E39 M5 (S62) SAL
32 13 060
Removing and installing power steering
(high)
Caution!
Make sure all parts are absolutely clean.
No dirt is allowed to enter the system.
Seal off pipe connections with plugs.
Recycling:
Observe country-specific waste-disposal regulations.
Draw off hydraulic fluid from container - do not reuse.
Installation:
Top up and bleed hydraulic system,
refer to 32 13 006.
Remove steering wheel,
refer to 32 33 000.
Unscrew and remove splash guard.
Remove heat shield.
Remove hydraulic lines.
Installation:
Replace sealing rings (D).
Tightening Torque,
refer to Technical Data 32 41 3AZ.
RA Removing and installing power steering (high)
BMW AG - TIS
21.02.2013 21:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
