5 Series E39 M5 (S62) SAL
32 21 281
Replacing center tie rod
Caution!
After assembly, align/adjust front axle.
Unscrew and remove splash guard.
Unfasten nut.
Press tie rod off pitman arm and idler arm with special tool
32 1 190.
Installation:
Replace self-locking nut.
Brace on hexagon socket if necessary.
Tightening Torque,
refer to Technical Data 32 21 3AZ.
Loosen left and right clamping screws.
Unscrew and remove tie rod adjusting thread from left and right tie
rod.
Installation:
Coat tie rod adjusting thread with special grease,
refer to BMW Parts Service.
Measure screw-in length of adjusting thread on old tie rod.
Screw in adjusting thread on new tie rod to appropriate depth
in left and right tie rod.
Tightening Torque,
refer to Technical Data 32 21 4AZ.
RA Replacing center tie rod
BMW AG - TIS
21.02.2013 21:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -