5 Series E39 M5 (S62) SAL
Secure special tool 32 2 140 to side of idler arm on control arm
mount.
Fit measuring drift firmly against tie rod and secure.
Remove special tool 32 2 140 without adjusting measuring drift.
Loosen clamping screw (1) and slide pitman arm upwards.
Secure special tool 32 2 140 on control arm mount.
Slide pitman arm downwards until tie rod abuts with measuring
drift.
Permitted deviation max.
±
1.5 mm
Tighten clamping screw.
Tightening Torque,
refer to Technical Data 32 21 6AZ.
Caution!
Check gap between pitman arm and steering gear.
Gap (A) between pitman arm and steering gear:
min. 0.5 mm;
max. 8.5 mm.
RA Adjusting pitman arm
BMW AG - TIS
21.02.2013 21:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
