Replacing Left or Right Body Molding for Rear Bumper - 5 Series E39 M5 Repair Instructions
51 12 435
Replacing left or right body molding from
sides of rear bumper
Remove center body molding from rear bumper,
refer to 51 12 432
Version without Park Distance Control (PDC):
First unclip back of body molding (1), then side (2) with special
tool 00 9 321 (folding strut) and pull backwards at an angle to
remove.
Installation:
Insert body molding at front, then clip into place.
Version with Park Distance Control (PDC):
Unclip body molding, unfasten ultrasonic converter and remove.
Lift chrome strip (1) out of clips (2) in body molding and remove.
RA Replacing left or right body molding from sides of rear bumper
BMW AG - TIS
22.02.2013 01:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -