5 Series E39 M5 (S62) SAL
Important!
Failure to comply with this disassembly sequence causes the
web (4) to break, thus destroying the finisher.
Adjust front seat to maximum forward position.
(1)
Raise finisher slightly on detent head,
(2)
Unfasten and raise inner clip lugs,
(3)
Pull finisher backwards to remove.
Disconnect connector (1) and remove (2).
Unfasten screws.
Move front seat as far back as possible.
Installation:
Replace screws (microencapsulation) or install old screws
with Loctite 270 (Sourcing Reference: BMW Parts Service).
Up to 1995 model:
Unclip front finisher and pull forwards to remove.
RA Removing and installing left or right front seat (normal / manual)
BMW AG - TIS
22.02.2013 03:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
