5 Series E39 M5 (S62) SAL
Unlock plug connection (1) and disconnect.
Release hose clamps (2) and detach hoses.
Pull water valve for heater (3) in direction of arrow out of rubber
mounts.
Installation:
Ensure guides (1) and (2) are correctly seated.
If necessary, replace rubber mount.
Water valve (Mono) without auxiliary water pump:
Unlock plug connection (1) and disconnect.
Release hose clamps (2) and detach hoses.
Pull water valve for heater (3) in direction of arrow out of rubber
mounts.
Installation:
Ensure guides (1) and (2) are correctly seated.
If necessary, replace rubber mount.
All:
RA Replacing water valve for heater
BMW AG - TIS
22.02.2013 05:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
