5 Series E60 520d (M47T2) SAL
Remove sealing cover (1) from heat shield.
Pull out seal plug.
Installation:
Retaining clip (1) on sealing cover (2) must be inserted at
heat shield.
Installation:
Replaced damaged seal plugs.
Insert three seal plugs (1) from above.
Release screws (1).
Important!
To avoid damaging the threads and prevent turbocharger
leakage, insert screws (1) in 1/2 turns simultaneously.
Installation:
Apply a thin coat of copper paste (CRC) to screw (1) threads,
Tightening torque 11 65 1AZ .
RA Removing and installing or replacing exhaust turbocharger (M47T2)
BMW AG - TIS
22.01.2013 20:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -