5 Series E60 520d (M47T2) SAL
13 53 330
Replacing all leakage oil lines (M47TU, M47T2)
Necessary preliminary tasks:
•
Read fault memory of DDE control unit
•
Switch off ignition
•
Layout of common rail system
•
Remove intake air manifold
Important!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an
alternator malfunction.
Unfasten screws.
Unlock plug on injectors and disconnect.
Note:
This procedure is applicable to all injectors.
Press in clip (1).
Detach connection of leakage oil line (2) upwards.
RA Replacing all leakage oil lines (M47TU, M47T2)
BMW AG - TIS
22.01.2013 20:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -