5 Series E60 520d (M47T2) SAL
(M47/N47)
Release screws and nut (1).
Remove cross member.
Tightening torque 23 71 2AZ/ 5AZ
.
Note:
Illustration similar
(M47/N47)
Slacken nut (1).
Exchange rubber mount.
Tightening torque 23 71 5AZ
.
M57/M57T2 only
Unfasten screws (1) and nuts (2).
Remove transmission cross-member.
Remove rubber mount from transmission cross-member.
Tightening torque 22 32 3AZ/ 4AZ
RA Replacing rubber mount for transmission mounting
BMW AG - TIS
22.01.2013 21:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
