5 Series E60 520d (M47T2) SAL
33 32 125
Replacing a ball joint in lower steering
knuckle / wheel carrier
Special tools required:
•
33 3 333
•
33 4 191
•
33 4 192
•
33 4 193
•
33 4 194
Necessary preliminary tasks:
•
Remove push rod/integral link
•
Remove stabilizer link from swinging arm
•
Remove spring strut shock absorber/shock absorber from
wheel carrier/swinging arm
Reconditioning special tool:
Cut highlighted area out of special tool 33 4 191 and then
deburr.
Remove circlip (1).
Pull out ball joint with special tools 33 4 193 , 33 4 191 ,
33 4 192 and 33 3 333 . Slotted side of special tool
33 4 191 must point to wheel carrier.
Installation:
Install new circlip (1).
RA Replacing a ball joint in lower steering knuckle / wheel carrier
BMW AG - TIS
22.01.2013 22:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -