5 Series E60 520d (M47T2) SAL
Guide handbrake Bowden cables (1) with a screwdriver inwards
and pull out of balance bar (2).
Disconnect cable (1) from handbrake check switch.
Release screws (2) and remove handbrake lever (3).
Installation:
Tightening torque 34 41 1AZ
.
Handbrake lever and adjustment unit (ASZE) are only exchanged
completely as a single unit.
RA Removing and installing / replacing handbrake lever
BMW AG - TIS
22.01.2013 22:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -