5 Series E60 520d (M47T2) SAL
Release screws (1).
Pull fuse holder (2) back slightly.
Disconnect plug connection (1).
Unlock catch (2) in direction of arrow and remove control unit for
comfort access system (3) from device carrier (4).
Installation:
Make sure control unit (3) is correctly seated in device
carrier (4).
Replacement:
Carry out programming/coding.
RA Removing and installing (replacing) control unit for comfort access system
BMW AG - TIS
23.01.2013 02:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -