5 Series E60 520d (M47T2) SAL
Disconnect left air duct (1) in direction of arrow (2) and (3).
Installation:
Make sure right air duct (1) is correctly seated.
Disconnect right air duct (1) in direction of arrow (2) and (3).
Installation:
Make sure right air duct (1) is correctly seated.
Unlock plug (1) and remove.
Release screws (2).
Remove cover (3) in direction of arrow.
Installation:
Ensure correct cable routing.
Make sure seal is correctly seated in cover (3).
Release screws (1).
Remove fan for heater - A/C unit (2) in direction of arrow.
Installation:
Make sure fan for heater - A/C unit (2) is correctly seated.
RA Removing and installing/replacing heater - A/C unit fan
BMW AG - TIS
23.01.2013 03:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
