5 Series E60 520d (N47) SAL
VK-23/Viets
Baugruppe/Group: 36
36 01 95 (945)
weltweit
All countries
02/1996
Wheels and Tyres
All models
Situation:
The wheels and tyres play an extremely important role with respect to the safety and ride
comfort of a vehicle. The current state of the art in automotive engineering means that
these components are subjected to very great loads.
Technical development in the tyre sector over the past years has achieved great progress.
As a consequence, the demands made on the scope and quality of service in the workshop
have also risen.
Since the last training document to be published on the subject of wheels/tyres was a
Service Information Programme (SIP) at the beginning of the 1980s, we have now revised
the training documentation in line with the present requirements.
Procedure:
There are now two new publications available on the subject of wheels and tyres:
SIP "Wheels and Tyres"
German
Order number 04 60 500
English
Order number 04 60 501
French
Order number 04 60 502
Spanish
Order number 04 60 503
BMW Service Information
Serves as a reference document and goes into the subject matter dealt with in the above-
mentioned training programme in greater detail.
The two training documents have different emphases. They complement one another and
should therefore be used jointly.
SIP
1.
Tyre Damage
2.
Removing and Fitting Tyres
3.
Special Wheel Rims (AH2, TD)
4.
Stationary Balancing and Balancing on the Vehicle
Service Information
1.
Function of the Tyre
Annex 1
2.
The Wheel Assembly
Annex 2
3.
Selecting Tyres
Annex 3
4.
Tyre Wear
Annex 4
5.
Irregular running and its causes
SI Wheels and Tyres All models
BMW AG - TIS
23.01.2013 15:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
