bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

11 SI Fault Documentation All Model Series > < 10 SI Test CD For Audio Systems All Model Series With CD Radio Or CD Changer
Page 2
background image

1. 

Audio system with CD drive fitted.

2. 

Battery charged and functional, if necessary use a suitable battery charger during the
test.

3. 

Set the "treble" and "bass" controls to their respective middle points.

4. 

Set loudness function (if available) to "on".

5. 

On systems with spatial sound switch or DSP amplifier, switch these off .

6. 

For the test, play the music track on the test CD (track 17) and increase the volume to
the upper limit of the output stage before reducing it slightly.

Note:

Note noise protection regulations - if necessary, wear ear protection!

Only use the test CD in the vehicle in conjunction with audio components which
have been approved by BMW!

The individual test steps are described in the enclosure to this SI.

Parts: 

Description

Part number

Test CD for audio systems

01 59 0 004 055

A test CD is supplied free of charge with this Service Information bulletin.

Further copies can be ordered (at a charge) from the parts sales department.

SI  Test CD for audio systems All model series with CD radio or CD changer

BMW AG - TIS

23.01.2013  15:54

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

11 SI Fault Documentation All Model Series > < 10 SI Test CD For Audio Systems All Model Series With CD Radio Or CD Changer