bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

25 RA Seat Belts_ Checking Condition Of Belt Strap, Function Of Inertia Reel Mechanism > < 24 RA Raising BMW Multi-trailer|Page 220
Page 3
background image

Caution!

Also lash the BMW multi-trailer to the flat girder bridges of the
lifting platform. Flag the protruding tow hitch and the drawbar
member of the BMW multi-trailer conspicuously so as to
prevent injury, e.g. with a red cloth.

MAHA twin-pillar lifting platform

The BMW multi-trailer can only be raised if you use the support
plate attachment sleeves for transporters (1). Position the axle of
the BMW multi-trailer in the direction of travel in front of the pillars
of the platform in order to obtain the specified lifting ranges and to
establish sufficient clearance between disk wheel and carrier
arms. The long carrier arms raise the front and the short carrier
arms raise the rear of the BMW multi-trailer.

Romaico-Lift twin-pillar lifting platform

The BMW multi-trailer can only be raised if you use the 146 mm
high attachments (1).  Position the axle of the BMW multi-trailer in
the direction of travel in front of the pillars of the platform in order
to obtain the specified lifting ranges and to establish sufficient
clearance between disk wheel and carrier arms. The long carrier
arms raise the front and the short carrier arms raise the rear of the
BMW multi-trailer.

Working pit

The BMW multi-trailer can be serviced or repaired in conjunction
with a working pit if the following measures are taken into
consideration. The BMW multi-trailer must be secured against
slipping/tilting sideways. The drawbar jockey wheel must be firmly
secured against rolling.

RA  Raising BMW multi-trailer

BMW AG - TIS

23.01.2013  16:08

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 3 -

25 RA Seat Belts_ Checking Condition Of Belt Strap, Function Of Inertia Reel Mechanism > < 24 RA Raising BMW Multi-trailer|Page 220