5 Series E60 520d (N47) SAL
Release screws (1).
Installation:
Clean all sealing surfaces.
Install all screws (1) and tighten down.
Install and tighten down screws (1).
Secure threaded bushes (1) with special tool 11 4 350 .
Tightening torque:11 41 1AZ
.
RA Removing and installing or replacing oil/vacuum pump (N47, N47S)
BMW AG - TIS
23.01.2013 16:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
