5 Series E60 520d (N47) SAL
Withdraw special tool from clutch plate with aid of accompanying
screw (1).
Installing removed SAC clutch with new clutch plate:
Installation:
Screws must be replaced.
Jointing torque and angle of rotation must be observed without
fail.
Important!
Before installing an SAC clutch which has been in service with
a new clutch plate: always reset adjustment ring in new
position.
Set SAC clutch down on a clean surface.
Install special tool 21 2 180 in SAC clutch (1).
RA Removing and installing or replacing clutch (SAC 240)
BMW AG - TIS
23.01.2013 17:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -