5 Series E60 520d (N47) SAL
51 24 050
Removing and installing/replacing lock
element (lock cylinder) for rear lid
Necessary preliminary tasks:
•
Remove panel for rear lid.
Disconnect plug connection (1) on microswitch.
Detach Bowden cable (2) from holders.
Move lock actuator (3) in direction of arrow up to end stop.
Release screws (1) and turn complete lock (2) in direction of
arrow.
Turn lock (1) to right until guide (2) is located in metal cutout (3).
Remove lock in direction of arrow.
RA Removing and installing/replacing lock element (lock cylinder) for rear lid
BMW AG - TIS
23.01.2013 22:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
