5 Series E60 520d (N47) SAL
On right-hand-drive cars, screw (2) must be located on left
side of special tool 61 6 100 .
Adjusting left wiper arm:
Unclip wiper arm cap (1) and remove in direction of arrow.
Installation:
Catches (1) of wiper arm cap (2) must not be damaged.
Make sure wiper arm cap (2) is correctly seated.
Release nut (1) slightly.
Position windscreen wiper arm (2) with special tool
00 9 331
or 61 6 100 on windscreen.
Turn windscreen wiper arm (2) in direction of arrow until contact
angle is correct.
Hold wiper arm (2) in this position and tighten down nut (1).
Installation:
Tightening torque 61 61 12AZ
.
Adjusting right wiper arm:
Unclip four-way linkage protective cap (1) and remove in direction
of arrow.
RA Checking/adjusting contact angle of windscreen wiper arms on windscreen
BMW AG - TIS
24.01.2013 01:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -