5 Series E60 520d (N47) SAL
Installation:
Catches (1) of four-way linkage protective cap (2) must not be
damaged.
Make sure four-way linkage protective cap (2) is correctly seated.
Release nut (1) slightly.
Position windscreen wiper arm (2) with special tool
00 9 331
or 61 6 100 on windscreen.
Turn windscreen wiper arm (2) in direction of arrow until contact
angle is correct.
Hold wiper arm (2) in this position and tighten down nut (1).
Installation:
Tightening torque 61 61 14AZ
.
RA Checking/adjusting contact angle of windscreen wiper arms on windscreen
BMW AG - TIS
24.01.2013 01:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
