5 Series E60 520i (M54) SAL
Release power steering pump on bracket, hydraulic lines remain connected.
Do not remove power steering
pump, secure against falling down.
Release A/C compressor on bracket, lines remain connected, do not
evacuate A/C system.
Do not remove A/C compressor,
secure against falling down.
Vehicles with Dynamic Drive only:
Unlock and detach hydraulic line (1).
Suspend engine from special tool 11 0 020 .
Release engine mounts on left and right from above.
Protect assembly compartment and hydraulic lines against
damage.
Installation:
Observe specified tightening torque and safety precautions in all
work steps.
RA Removing and installing engine (M54)
BMW AG - TIS
24.01.2013 15:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -