5 Series E60 520i (M54) SAL
13 54 250
Removing and installing/replacing intake
hose (M54)
Necessary preliminary tasks:
•
Remove suction filter housing.
Release lock (1) and detach from intake hose (5).
Release screw (3) and place suction jet pump (2) to one side.
Loosen hose clamps (4).
Detach intake hose (5) from throttle assembly and idle speed
control valve and remove upwards.
Assemble engine.
Check intake manifold for leaks.
Check function of DME.
RA Removing and installing/replacing intake hose (M54)
BMW AG - TIS
24.01.2013 16:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -