5 Series E60 520i (M54) SAL
22 11 110
Replacing left engine support arm (M54)
Necessary preliminary tasks:
•
Secure engine in installation position.
•
Remove suction filter housing.
•
Remove intake hose.
Disconnect return hose (1) from cyclone filter on oil separator.
Release screw (2) and turn dipstick (3) to one side.
Release nut (1) on engine mount.
Tightening torque 22 11 2AZ
.
Release screws and remove engine support arm (1).
Tightening torque 22 11 3AZ
.
RA Replacing left engine support arm (M54)
BMW AG - TIS
24.01.2013 17:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
