Replacing Selector Shaft Seal for BMW E60 520i Automatic Transmission (GA6HP19Z)
24 14 002
Replacing shaft seal for selector shaft
(GA6HP19Z)
Special tools required:
•
24 5 361
•
24 5 362
•
24 5 364
•
24 5 366
Important!
After completion of work, check transmission fluid level.
Use only the approved transmission fluid.
Failure to comply with this requirement will result in serious
damage to the automatic transmission!
Necessary preliminary tasks:
-
Release screws and remove transmission underbody
protection (1) (E65 only).
-
Remove rear underbody protection (E60/E61 only).
Note:
Version 1:
Unfasten nut.
Remove cable (1).
Installation:
Adjusting cable:
-
Unfasten nut.
-
Adjust cable via holder (2).
RA Replacing shaft seal for selector shaft (GA6HP19Z)
BMW AG - TIS
24.01.2013 17:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
