5 Series E60 520i (M54) SAL
51 47 491
Removing and installing/replacing rear
underbody protection
Necessary preliminary tasks:
•
Remove front underbody protection
Not M5
Unfasten screws (1 ... 3).
Press heat shield (5) back.
Release screws (4) and remove underbody protection (6).
Installation:
Ensure correct seating.
Center underbody protection (6) and tighten down all screws.
M5 only
Unfasten screws (1 and 2).
Remove underbody protection (3).
Installation:
Ensure correct seating.
Center underbody protection (3) and tighten down all screws.
RA Removing and installing/replacing rear underbody protection
BMW AG - TIS
24.01.2013 17:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -