5 Series E60 520i (M54) SAL
Note:
Position of butylene tape (1) on inner door plate.
Important!
Do not damage Bowden cable (2) and lock knob control
rod (3).
Note:
Position of butylene tape (1) on sound insulation (2).
Clean bonding area with adhesive remover (sourcing reference:
BMW Parts Service).
Air drying time: 1 minute
Important!
Adhesive areas must be dry and free of dust and grease.
Once it has been cleaned, do not touch the adhesive area
with bare hands.
Lay single row of 6 mm dia. butylene tape or double row of 3 mm
dia. tape (sourcing reference: BMW Parts Service) in specified
adhesive area.
Heat butylene tape (hot air blower) and press down firmly on
sound insulation all round.
Contact pressure with hand roller: approx. 30 N/cm
2
Manual contact pressure: approx. 10 N/cm
2
Note:
Firm thumb pressure has approx. 50 N/cm
2
RA Removing and installing/replacing sound insulation in left or right front door
BMW AG - TIS
24.01.2013 22:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -