5 Series E60 520i (N43) SAL
31 21 180
Replacing bearings (wheel hub) for front
wheel
Necessary preliminary tasks:
•
Remove swivel bearing
Important!
When clamping swivel bearing unit, make sure it is only
clamped at wheel bearing.
Clamp swivel bearing as illustrated.
Release screws and remove swivel bearing upwards.
Keep tapped holes (1) clean and free from grease.
Keep contact surface (2) of wheel bearing and swivel bearing
clean and free from grease.
Installation:
If the wheel bearing is not replaced, all the tapped holes (1) in the
wheel bearing must be reconditioned.
Replace screws.
Tightening torque 31 21 5AZ
.
RA Replacing bearings (wheel hub) for front wheel
BMW AG - TIS
25.01.2013 17:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -