5 Series E60 520i (N46T) SAL
Installation:
Installing compression rings (1):
Important!
Plain compression rings (1) can easily break.
Carefully pull compression ring (1) apart and install from front.
Press compression ring (1) on one side into groove, hook in
catch on other side.
Insert inlet camshaft (1) so that curvature on twin surface points
downwards.
Ends of compression rings (1) point upwards.
Make sure compression rings (1) are engaged at ends.
Fit special tool 11 9 302 as illustrated and screw down with
special tool 11 9 303 in inlet camshaft.
Note:
Special tool 11 9 302 secures inlet camshaft with bearing
bracket.
RA Removing and installing/replacing inlet camshaft (N46T)
BMW AG - TIS
26.01.2013 18:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -