5 Series E60 520i (N46T) SAL
Installation:
Replace sealing ring (2) on suction tube (1).
Crank engine at central bolt and secure flywheel with special tool
11 5 120 .
Automatic transmission only
Illustration does not show automatic transmission.
Important!
On engines with automatic transmissions, there is shortly
before the special tool bore (1) for the TDC position a large
bore (2) which can be confused with the special tool bore.
If the flywheel is secured in the correct bore (1) with special tool
11 5 120 , the engine can no longer be moved at the central bolt.
Important!
Left-hand threads.
Unscrew nut (1).
RA Removing and installing/replacing oil pump (N46T)
BMW AG - TIS
26.01.2013 18:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
