bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

ABOUT US
2 RA Removing And Installing_replacing Chain Tensioner For Oil Pump Drive (N46T)|Page 472 > < 2 RA Removing And Installing_replacing Chain Tensioner For Oil Pump Drive (N46T)

5 Series E60 520i (N46T) SAL

Page 2
background image

Release screw (2).

Important!

CCW thread!

Release nut (1) on oil pump sprocket wheel.

Installation:

Tightening torque 11 41 2AZ .

Push clamping rail (4) towards rear and secure with special tool 
11 3 340 .

Release screw connection (3) of guide rail to oil pump. 

Note:

Chain tensioner (1) is secured with a pin (2).

Detach chain tensioner (1) from locking pin (2).

Press lug (1).

Pull guide rail (2) downwards.

Remove sprocket wheel (3) from oil pump drive shaft.

RA  Removing and installing/replacing chain tensioner for oil pump drive (N46T)

BMW AG - TIS

26.01.2013  18:17

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

2 RA Removing And Installing_replacing Chain Tensioner For Oil Pump Drive (N46T)|Page 472 > < 2 RA Removing And Installing_replacing Chain Tensioner For Oil Pump Drive (N46T)