5 Series E60 520i (N46T) SAL
22 32 001
Replacing rubber mount for transmission
mounting
Necessary preliminary tasks:
•
Remove rear underbody protection
•
Remove complete exhaust system
•
Remove exhaust system bracket (M47/N47)
•
Support transmission with lifter.
If necessary, remove heat shield (1) on left and right.
Note:
N53 only
Release cable from holders (1).
Remove cable from holders on heat shield.
Note:
Illustration similar
M57/M57T2 only
Release screws (1) and nut (2) and remove transmission cross-
member.
Remove rubber mount from transmission cross-member.
Tightening torque 22 32 3AZ/4AZ
.
RA Replacing rubber mount for transmission mounting
BMW AG - TIS
26.01.2013 19:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -