5 Series E60 520i (N46T) SAL
33 31 503
Lowering/raising rear axle carrier
Special tools required:
•
00 2 030
•
00 2 040
•
33 4 232
•
33 4 233
Necessary preliminary tasks:
•
Remove rear wheels
•
Remove exhaust system.
•
Partially detach heat insulation at rear
•
Remove handbrake cable on both sides from hanging hook
•
Detach plug connection for pulse generator on both sides
and expose line up to control arm
•
Detach plug connection for brake pad wear sensor on right
and expose line up to control arm
•
If necessary, disconnect plug connection from ride-height
sensor
•
Remove spring strut shock absorber on both sides from
wheel carrier.
Warning!
Danger of injury!
Failure to comply with the following instructions may result
in the vehicle slipping off the lifting platform and critically
injuring other persons.
When supporting components, make sure that
•
the vehicle can no longer be raised or lowered
•
the vehicle does not lift off the locating plates on the
lifting platform
RA Lowering/raising rear axle carrier
BMW AG - TIS
26.01.2013 21:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
