5 Series E60 520i (N46T) SAL
34 33 071
Replacing vacuum hose for brake booster
(M57TU / M57T2 / M47T2)
Read and comply with General Information.
Important!
Before beginning work, fully press the brake pedal several
times to reduce the vacuum pressure in the brake booster.
This makes it easier to remove the PA pipe.
Non-return valve and PA pipe are welded together and are
replaced together as a single unit.
Necessary preliminary tasks:
Remove lower section of microfilter housing.
Installation:
Replace hose clamps.
Detach non-return valve (1) from brake booster.
Detach vacuum hose from holder (1).
Unfasten hose clip (2).
Detach moulded hose from PA tube.
Installation:
Replace hose clip.
RA Replacing vacuum hose for brake booster (M57TU / M57T2 / M47T2)
BMW AG - TIS
26.01.2013 21:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
