5 Series E60 520i (N46T) SAL
34 41 120
Removing and installing / replacing both
handbrake Bowden cables
Special tools required:
•
32 1 030
Necessary preliminary tasks:
•
Remove center console
•
Remove rear brake disks
•
Remove exhaust system.
•
Remove heat shield.
After completing tasks, adjust handbrake.
Lock adjuster unit (ASZE).
Using special tool 32 1 030 , press stop (1) of adjusting spring
back to such an extent that retaining hook (2) engages in
stop (1).
Unclip mounting clip (1) upwards out of balance arm (2).
RA Removing and installing / replacing both handbrake Bowden cables
BMW AG - TIS
26.01.2013 21:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
