5 Series E60 520i (N46T) SAL
Installation:
Observe installation direction: hinge end is identified by means of
plastic sleeve (1).
Following parts on the tension spring with damper must not be
damaged or missing:
1
Plastic sleeve
2
Foam inlay in tension spring
Important!
Semicircular rubber buffer (2) (from window repair kit) must
be fitted to rear lid hinge (3) without end stop (1).
Stick semicircular rubber buffer (2) at spacing (A) on rear lid
hinge (3).
A = 65 mm
Semicircular rubber buffer (2) must touch rear lid hinge (3) in
area (4) with rear lid open.
RA Removing and installing / replacing left tension spring with damper for rear lid
BMW AG - TIS
26.01.2013 23:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -