5 Series E60 520i (N46T) SAL
51 37 000
Removing and installing complete rear left or
right power window unit
Necessary preliminary tasks:
•
Remove rear door window glass
Slacken screws (1 and 2) (do not release).
Remove clamp (3) in direction of arrow.
Tightening torque 51 35 2AZ
.
Installation:
Make sure guide (1) is correctly seated when fitting clamp (2).
Release screw on power window unit (2) through bore (1).
Disconnect plug connection (3) from drive (4).
Feed power window unit (2) in direction of arrow out of inner door
panel.
RA Removing and installing complete rear left or right power window unit
BMW AG - TIS
27.01.2013 00:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
