5 Series E60 520i (N46T) SAL
51 43 251
Removing and installing/replacing trim for
rear left or right roof pillar (rear)
Warning!
Follow safety instructions for working on cars with airbag
systems.
Important!
Do not use any sharp-edged tools to remove trim (risk of
damage to head airbag).
Lever out airbag emblem (1) and release screw underneath.
Installation:
Tightening torque 51 43 1AZ
.
Unclip clip (3) and clips (4) of trim (2) and pull out trim (2)
inwards and upwards.
Installation:
Retainer (1) on trim (2) must not be damaged or missing.
Installation:
Following parts of trim (4) must not be damaged or missing:
1
Clip
2
Guide
3
Clips
RA Removing and installing/replacing trim for rear left or right roof pillar (rear)
BMW AG - TIS
27.01.2013 00:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
